Austin Foundation Repair Directory
Menu

Helical piers

Helical piers are steel shafts fitted with screw-like helix plates that are rotated into the soil until they reach stable load-bearing ground. They are attached to a foundation to support it and stop further settling.

A helical pier is a steel shaft with one or more helix plates welded near its tip, shaped like the thread of a large screw. A crew rotates the shaft into the ground with a hydraulic torque motor, and the helices pull the pier down through the soil until the installation torque shows that it has reached firm, load-bearing material. The upper end is then bracketed to the footing or foundation wall, so the house rests on the piers instead of on soil that has moved.

The reason this matters is simple. When soil under a foundation shrinks, swells, or washes out, the structure settles or cracks. Helical piers offer a way to support that load on deeper, more stable soil without excavating a full new footing. Because the piers are installed with machinery rather than poured concrete, the work can be done in tight spaces and often without a long cure time before loading. Installation torque is recorded during driving, which gives the installer and the homeowner a measurable check on the soil conditions at each pier location.

Helical piers are used for both new construction and repair, and they are common on lighter structures, additions, decks, and retrofits where existing footings have failed. They are also used with push piers and other underpinning methods, depending on soil type and the load involved. If you are looking for contractors who install or repair these systems, the foundation repair providers listed in this directory cover the Austin area.

"

Related on this site