Austin Foundation Repair Directory
Menu

Post-tension slab

A post-tension slab is a concrete foundation slab reinforced with high-strength steel tendons that are stretched and anchored after the concrete has been poured and cured. The tension compresses the slab, helping it resist cracking as the soil beneath it shifts.

A post-tension slab is a concrete slab, usually a house foundation, that is reinforced with high-strength steel cables called tendons. Unlike a conventional slab that relies on rebar sitting loose in the concrete, a post-tension slab has its tendons stretched with a hydraulic jack after the pour, once the concrete has gained enough strength. The tendons are then locked off at each end with anchors, which hold the tension permanently and put the slab into compression.

The tendons run through plastic sheathing or ducts in the slab, and the anchors are the metal end fittings embedded in the concrete at the edges. Because the slab is pre-compressed, it can bend a little with soil movement without cracking as readily as a slab with no built-in tension. This design is common in expansive clay soils like those found across the Austin area, which is why many local homes sit on this type of foundation.

Tendons matter because the tension is what keeps the slab working. If a tendon is cut, for example during a plumbing repair, trenching, or a careless drill hole, it loses its load and the surrounding slab can crack or settle unevenly. A broken or corroded tendon can also let a section of slab move differently from the rest. Repairing this usually means assessing which tendons are affected and re-tensioning or splicing them, which is specialized work that calls for a qualified contractor. Homeowners who suspect damage to a post-tension slab can start by reviewing providers in our slab foundation repair category.

"

Related on this site